Metal Brite Instructions Metal Brite Plate Instructions
ITEMS NEEDED

ITEMS NEEDED

1. Metal Brite Activator Recommended  or  Arm & Hammer Super Washing Soda (usually found in the bleach section of your grocery store). The instructions will list other products that may also be used. Or you may purchase our Metal Brite Activator  along with the plate.

2. Non Metal Container large enough to hold Items to be cleaned.

3. Hot tap water

4. Dry Towel
**Note: pre-wash all heavily tarnished items first in mild soap and hot water.

MORE HELPFUL TIPS

MORE HELPFUL TIPS

helpful tips

VERY IMPORTANT to keep the water HOT(not boiling) and the plate clean. Before each use give the plate a good scrubbing with an abrasive cleaner such as Comet, SOS or Brillo pad. While using it,  take the plate out frequently and wipe with dry towel, flip over and use the other side. This will prevent the buildup of tarnish on the plate. NEVER leave the plate in the water when you are not using it. Just wipe and set aside till you are ready to use it again.  Remember, Metal Brite Electrolytic Plate will not remove any of the underlying metal.  I know you will enjoy using this very simple easy and safe method to clean even your most delicate antique sterling and silver plate items.

SATISFIED CUSTOMER

SATISFIED CUSTOMER

Got it today, put it to work and am very impressed with the results.
Many Thanks, John
TOUCH UP GLOVES

TOUCH UP GLOVES

touch up gloves

Great for in-between cleanings. For More Info Click Here.

4PLY POLISHING CLOTH

4PLY POLISHING CLOTH

4ply polishing cloth

4ply Polishing Cloth to restore the Luster. For More Info Click Here.

Shopping Basket

Shopping Basket

Items: 0
Subtotal: $0.00
Note: All prices in US Dollars
STEP BY STEP INSTRUCTIONS

STEP BY STEP INSTRUCTIONS

BELOW ARE THE EASY TO USE STEP BY STEP INSTRUCTIONS FOR THE USE OF THE METAL BRITE ELECTROLYTIC PLATE USING THE ACTIVATOR,  ARM & HAMMER SUPER WASHING SODA OR POWDERED CALGON.   ALL INSTRUCTIONS BELOW ARE INCLUDED IN OUR METAL BRITE PACKAGE.  WHEN USING THE METAL BRITE ACTIVATOR PLEASE FOLLOW THE INSTRUCTIONS ON THE PRINTABLE INSTRUCTION PAGE ALSO INCLUDED IN THE PACKAGE.  THE ACTIVATOR IS CONCINTRATED AND YOU DO NOT NEED TO USE AS MUCH.

STEP ONE.

STEP ONE.

STEP ONE
Use one heaping tablespoon ARM & HAMMER WASHING SODA OR CALGON per quart of water or 5 per gallon. Pour appropriate amount of HOT water into non metallic container** and stir to dissolve powder. Now place your Metal Brite Plate into the solution. YOU MAY USE A STAINLESS SINK BY PLACING A MAT OR TOWEL IN THE BOTTOM.
STEP TWO

STEP TWO

STEP TWO
Place item to be cleaned on plate.
STEP THREE

STEP THREE

STEP 3
Plate will only remove tarnish to the depth of the water. A larger container with more solution may be used for larger items.
STEP FOUR

STEP FOUR

STEP FOUR
Items may be rotated to clean more of the surface.
STEP FIVE

STEP FIVE

STEP FIVE
Continue rotating until entire surface is clean.
STEP SIX

STEP SIX

STEP SEVEN
Wipe with Dry Towel and repeat dipping if needed.
FINAL STEP

FINAL STEP

FINAL STEP
To enhance and preserve the luster, lightly buff with (optional) Polishing Cloth. Metal Brite does not remove any of the underlying Silver, only tarnish. Heavy Tarnish damages your Silver. If your silver is slightly dull or grayish after using the Metal Brite Plate, just lightly buff with polish or polishing cloth to restore the shine. Best if finished with MAAS Metal Protector for a long lasting shine.
Copyright © Metal Brite Venus, Florida
cleansilver@metalbriteproducts.com